Sign Installation in Hollywood, CA

Your Sign Deserves a Flawless Installation

A new storefront sign on Hollywood Boulevard, a channel letter set on a Sunset Boulevard corner, a lit cabinet over a production office near Vine: the sign goes up once, and it has to look right the day it goes up and still look right years later. The install is where most signs go sideways. At Los Angeles Sign Company, we handle the permit, the survey, the lift, and the finish so your Hollywood sign reads clean from the sidewalk and stays that way through the seasons.

Why a Hollywood Sign Install Has to Last

Hollywood signs work harder than most. They sit through coastal humidity, late-summer sun, and the foot traffic of a busy commercial corridor, and they get photographed by half the people who walk by. A loose anchor, a rust streak, or a panel that goes dim shows up fast on a street where the sign is part of the storefront's reputation. We build the install around materials that hold up, anchors set into the right substrate, and electrical work done to code, so the sign keeps doing its job without service calls every few months.

Sign Installation Services in Hollywood, CA

We install most types of commercial signage across Hollywood, from sidewalk-facing storefronts to high-mounted cabinets above the second floor. The categories below are what we handle most often. If your sign falls outside these, we’ll quote it the same way.

Storefront Sign Installation

Storefront installs are the bread and butter of Hollywood signage. Channel letters, push-through cabinets, dimensional logos, and panel signs all live on the building face, and they all share the same install requirements: clean anchor pattern, level set, and a power feed that ties in without leaving exposed conduit. We size the install to the wall you have, including stucco, concrete, and tile facades that need different mounting hardware. See more on our storefront signage work.

High-Rise and Elevated Sign Installation

Signs above the second floor in Hollywood need extra coordination: lift access, roof-tie protection, and in some cases an engineered roof load review. We handle the staging, the rigging, and the post-install inspection so the sign is up safely and signed off by the city. See high-rise signage for the full scope.

Illuminated Sign Installation

Lit signs need an electrician on the install, not just a crew with a lift. We run the wiring through the wall, set the channel letters or backlit cabinet, and test the lighting before the crew leaves. The power supply is mounted where you can service it, the dimming is set, and the sign comes on the same night the install wraps. Tied to our backlit signs and letters work.

Monument and Ground Sign Installation

Monument signs sit on the property line and have to handle traffic, irrigation, and the occasional bump. We pour the footing to the engineered spec, set the structure, and trim it out so the finish matches what you saw on the rendering. Lighting, landscaping cuts, and faceplates are all coordinated on the same install. More on our monument sign work.

One Hollywood Sign Crew for Every Sign Type

The install crew that shows up to your job is our crew. We don’t pass the lift, the electrical, or the finish work to whoever was available that week. The same people who walked your property and signed off on the engineering are the ones on site the day the sign goes up. That matters most when something needs a small adjustment on the day, like a stucco patch around an anchor or a wiring run that has to dodge a window header. The crew knows the sign and can solve it on site without a callback.

How We Install Signs in Hollywood, CA

Step 1: Walk the Property With You

We start with a site walk. The crew lead and the project manager come out together, meet you at the property, look at the wall, the mounting surface, the sightlines from the street, and the power. You tell us what you want the sign to do. We tell you what the building will allow. That conversation sets the rest of the project.

Step 2: A Real Site Survey

The site survey is where the install gets locked down. We take measurements, photograph the mounting surface, check power, and pull elevation drawings so the sign is engineered to fit the building, not the other way around. This is also where we confirm whether the location falls inside the Hollywood Signage Supplemental Use District and what that means for your sign.

Step 3: Permit Coordination

Sign permits in Hollywood go through the Los Angeles Department of Building and Safety. We prepare the drawings, submit the application, respond to corrections, and pull the sign permit before any install date is set. You don't chase the city. We do.

Step 4: Install Day

On install day, we show up with the crew, the lift, and the materials staged so the work moves. We protect the storefront, set the sign, run the electrical, and test the lighting. If there's a tenant or a neighboring business inside, we plan the window for the lowest disruption.

Step 5: Final Walk and Sign-Off

After the sign is up, we walk it with you. We confirm the lighting, the alignment, and any finish details, then leave you with the permit documents, the install photos, and the warranty in writing. If the city does a post-install inspection, we're the ones who meet them on site.

Why Hollywood Businesses Hire Us for the Install

We’ve installed signs in Hollywood for storefronts, studios, production companies, and ground-floor offices. The work below is what owners and property managers tell us made the difference.

Hollywood Sign Code Experience

The Hollywood Signage Supplemental Use District has its own rules: where electronic signs are allowed, where they aren't, what the size and height limits are, and which corridors fall under tighter review. We've read the chapter, and we've pulled permits inside the district. You don't need to learn the code. We already know it.

Permits and Engineering Handled In-House

Most install delays start with the permit work itself. Our team handles the sign engineering and the permit application under the same roof, so the same package that goes through engineering is the same one that goes to the counter, and the same team responds when corrections come back. The install date holds.

Two Decades of Sign Installation in Hollywood

Our install crews are California licensed, bonded, and insured, and the electrical work is done by a certified electrician on staff. The lift operators are trained on the equipment we use, and the rigging follows the spec the engineer signed off on. Property managers in Hollywood require this paperwork, and we have it on file before the project starts.

Recent Sign Installation Projects

See real examples of our work to find the right style, materials, and finish for your next sign.

Two Decades of Sign Installation in Hollywood

We’ve installed signs across Hollywood and the wider Los Angeles area for two decades. That covers everything from a single channel letter swap on a Boulevard storefront to full sign packages for production offices and entertainment industry tenants. The same crew has been through enough Hollywood installs to know which mounting situations need extra time, which permit reviewers want which drawings, and how to keep an install on schedule when a street closure or filming permit lands on the same block. Read more on professional sign installation in Los Angeles.

Sign installer mounting illuminated channel letters on a Hollywood, CA storefront at night

What Our Clients Are Saying

Proudly Serving Hollywood and Surrounding Areas

Exterior Sign Installation in Hollywood, CA

Exterior signs do the heavy lifting on a Hollywood property. They face the sun, the rain, the wind off the Pacific, and the foot traffic of one of the busiest commercial corridors in the city, so the install has to hold all of that and still read clean from across the street years in. We handle channel letters and cabinet signs flush to the building face, pylon and pole installs for properties set back from the curb, wall-mounted and facade signs on everything from older brick fronts to newer composite panels, and awnings and blade signs that catch the sidewalk angle. Every install is run by the same crew that walks the property with you, pulls the permit through LADBS, and signs off the project at the end.

Frequently Asked Questions

Most exterior sign installation projects in Hollywood take a single day on site once the permit is approved and the sign is fabricated. The front end of the timeline runs longer: the site survey and engineering usually take one to two weeks, the LADBS permit averages two to four weeks, and fabrication runs three to five weeks for standard channel letters or cabinets. We give you a real schedule after the walk-through and update you the moment the city or a supplier moves.

Yes. Almost every exterior sign install in Hollywood needs a permit through the Los Angeles Department of Building and Safety, and signs inside the Hollywood Signage Supplemental Use District may also need supplemental review. We prep the drawings, file the application, respond to corrections, and handle the inspection so you don’t have to walk anything through the counter yourself.

Hollywood weather is mild, but the sun and salt air still take a toll on exterior signage over the long run. We use aluminum cabinets, UV-rated acrylic faces, marine-grade hardware, and weather-sealed electrical components on every exterior sign installation. The right material choice depends on the location, the sign type, and how much sun the wall sees through the day, and we walk you through it on the survey.

A well-installed exterior sign in Hollywood usually needs a basic service check every couple of years for lighting, fastener tension, and faceplate condition. LED runs typically last several years before any module needs replacement. We keep records of what was installed so any service call can be quoted without another site visit.

Yes. Our exterior sign installer crews work across the full range of Hollywood commercial properties, including retail storefronts, restaurants, bars, hotels, production offices, post houses, and ground-floor offices. The install approach is the same regardless of the tenant type: walk the property, survey, engineer, permit, install, and sign off.

Related Services

Los Angeles Sign Company is committed to bringing your vision to life. Our talented team includes graphic designers, architects, and signage specialists, ensuring your project is handled with expertise. Here are more ways we can help:

Custom Sign Design

Create eye-catching designs that blend functionality and appeal, tailored specifically to your brand.

Sign Permitting

Navigating permits can be daunting, but our team ensures compliance with California regulations, streamlining the process for you.

Sign Engineering

We customize structures for durability and to accommodate your desired materials.

Sign Manufacturing

We use only high-quality materials, ensuring your signage is built to last.

Sign Installation

Our experts ensure your sign is installed correctly for maximum visibility, both indoors and outdoors.

Service and Maintenance

Keep your signs in top condition with our maintenance services, creating lasting positive impressions.

Sign Removal

Stress-free, hassle-free, efficient, and timely sign removal services for your business.

Get Your Hollywood Exterior Sign Installed by a Local Crew

Whether you’re putting up a fresh storefront sign on Hollywood Boulevard, mounting a new pylon on a corner lot, or swapping out an existing wall sign on a production office, we’ll come out and quote the install in person. You get a clear timeline, a permit plan through LADBS, and one crew from the survey through the final sign-off. Call us when you’re ready to schedule the walk-through.

mobile-la-sign-co-Logo